Chapter 3 — Configuring the CV30
54 CV30 Fixed Mount Computer With Windows CE User’s Manual
3 For Association, choose Open, WPA, WPA2, or Network
EAP.
4 For Encryption, choose TKIP or AES if you selected WPA2
for association, or WEP or CKIP if you selected Network
EAP for association.
5 For Subject Name, type a unique subject name for this
protocol.
6 For User Name, type a unique user name for this protocol.
7 Tap Get Certificates to obtain or import server certificates.
For help with certificates, see “Loading a Certificate” on
page 62.
8 Tap Additional Settings to server certificate validation and
trust.
9 Check Validate Server Certificate to verify the identity of the
authentication server based on its certificate when using TLS.
10 Tap Root CA, select a root certificate, and then tap OK.
11 Enter the Common Names of trusted servers.
12 Tap OK.
To Next Page
Loading...
