Intermec CV30 - Page 65

Chapter 3 — Configuring the CV30
CV30 Fixed Mount Computer With Windows CE User’s Manual 55
Configuring TTLS Security With Profile Wizard
TTLS (Technical Translation and Localization Services) protocol
provides authentication like EAP-TLS but does not require user
certificates. User authentication is done using a password or other
credentials that are transported in a securely encrypted “tunnel”
established using server certificates.
To configure TTLS security
1 In the Profile Wizard, select the Security page.
2 For 8021x Security, choose TTLS.
3 For Association, choose Open, WPA, WPA2, or Network
EAP.
4 For Encryption, choose TKIP or AES if you selected WPA2
for association, or WEP or CKIP if you selected Network
EAP for association.
5 For Username, type a unique username for this protocol.
6 In the Password field, type a unique password for this
protocol.
7 Select Prompt for password to have the user enter this
password each time to access the protocol, or select Use
following password to use the protocol without entering a
password each time you use the CV30.