Intermec EasyCoder PD41 Programmer's Guide

ZSim Programmer’s Guide iii
Document Change Record
This page records changes to this document.
Version
Number
Date Description of Change
1-960612-02 07/2006 Updated for version 5 of ZSim. Added
new commands.
937-009-001 12/2007 Updated for new versions of Fingerprint
and supported printer models. Download
and install process clarified.
937-009-002 04/2008 Updated the manual to include support
for the PB50 printer.

Intermec EasyCoder PD41 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power requirements	100-240 VAC ±10%, 45-65 Hz
Media thickness	2.3 - 9.8 mm
Maximum label width	104 mm
Maximum label length	0.15 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	453 mm
Width	273 mm
Height	270 mm
Weight	13000 g