Intermec EasyCoder PD41 Programmer's Guide

ZSim Programmer’s Guide ix
the Software to any country that is not party to either: (i)
The Berne Convention of 1989, (ii) The Universal Copy
-
right Convention, (iii) The Buenos Aires Convention, or
(iv) a treaty with the United States of America (U.S.A.)
which allows for the recognition of the property rights
claimed by Intermec or its suppliers in the Software. Any
export or import of the Software to such country in viola
-
tion of this section is prohibited and shall constitute a
breach of this License.

Intermec EasyCoder PD41 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power requirements	100-240 VAC ±10%, 45-65 Hz
Media thickness	2.3 - 9.8 mm
Maximum label width	104 mm
Maximum label length	0.15 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	453 mm
Width	273 mm
Height	270 mm
Weight	13000 g