Chapter 1 — Getting Started
20 IF30 Fixed Reader User’s Manual
8 Connect the AC power cord to an AC outlet. As soon as you
apply power, the IF30 boots and the green Power LED turns
on.
The IF30 is now ready to communicate in your network.
Setting the Date and Time
After you have installed the IF30, you can set the date and time
via the web browser interface.
To set the date and time
1 Connect to the IF30 via the web browser interface. For help,
see “Using the Web Browser Interface” on page 14.
2 On the web browser screen, click the date and time in the
upper right-hand corner.
The Set Clock screen appears.
3 In the Date field, enter the current date using the format
MM/DD/YYYY, where:
MM is the month.
DD is the date.
YYYY is the year.
To Next Page
Loading...
