Intermec IF30

Chapter 3 — Creating and Using RFID Applications
50 IF30 Fixed Reader User’s Manual
Viewing the DCE Events Log
If you enable DCE logging, you can see a list of commands sent
and received through the DCE. You can save the logfile as a .txt
file.
To enable DCE logging and view the logfile
1 From the menu, click RFID Module > DCE Configuration.
the DCE Configuration screen appears.
2 Check the Enable Logging check box.
3 Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes,
and then click Save Changes and Reboot. For help, see
“Saving Configuration Changes” on page 15.
4 After the IF30 reboots, click Refresh in the browser menu.
The login screen appears.
5 Enter your user name and password, and then click Login.
The TCP/IP Settings screen appears.
6 From the menu, click RFID Module > DCE Configuration.
The DCE configuration screen appears.
7 Click Display Log, the DCE Configuration/Display Log
screen appears with a list of command events.
8 To save the log file, click Download Logfile and then choose
File > Save As. Follow the prompts to save the log file to your
desktop PC.