Chapter 4 — Managing, Upgrading, and Troubleshooting the IF30
IF30 Fixed Reader User’s Manual 57
Enabling Simple Network Management Protocol (SNMP)
You can access and manage the IF30 from a Simple Network
Management Protocol (SNMP) station. Contact a representative
if you need to obtain a copy of the management information base
(MIB).
Before you can use an SNMP management station, you must
define the IF30 SNMP community strings.
To configure the SNMP community strings
1 From the menu, click Network Management. The Network
Management screen appears.
2 Configure the SNMP community parameters. For help, see
the table on the next page.
3 If you enabled SNMPv3, click Network Management >
SNMPv3 Configuration. The SNMPv3 Configuration
screen appears.
If you did not enable SNMPv3, continue with Step 5.
To Next Page
Loading...
