Intermec IF30

Chapter 4 — Managing, Upgrading, and Troubleshooting the IF30
66 IF30 Fixed Reader User’s Manual
Upgrading Firmware
This section explains how to import and install the IF30 and
RFID firmware upgrades to the IF30.
To upgrade the firmware
1 From the menu, click Upgrade Software. The Upgrade
Software. The Upgrade Software screen appears.
2 Click Browse to browse to the location of the upgrade file,
and then double-click the filename. The name of the file
appears in the Enter or select the name of the firmware
upgrade file: entry field.
3 Click Upgrade. The file is imported to the IF30. When the
file has been imported, the Save/Discard Changes screen
appears. The new firmware version appears under Pending
Upgrade. You may need to scroll to see this part of the screen.
Note: To upgrade the firmware, use only files provided by
Intermec. Be sure to contact your Intermec RFID system
consultant before upgrading.
Make sure the IF30 is connected to a reliable AC power source
before you upgrade the firmware. Do not cycle power to the
IF30 during the upgrade. If AC power is lost during the
upgrade, the IF30 may require factory repair.