Intermec IF30

Chapter 4 — Managing, Upgrading, and Troubleshooting the IF30
54 IF30 Fixed Reader User’s Manual
Managing the IF30
There are several methods you can use to manage the IF30. You
can use:
• a web browser. For help, see “Using the Web Browser
Interface” on page 14. This manual assumes that you are
using this method for all procedures.
• Intermec SmartSystems Foundation. For help, see the next
section.
• the Wavelink Avalanche client management system. For help,
see “Using Wavelink Avalanche” on page 55.
• an SNMP management station. For help, see “Enabling
Simple Network Management Protocol (SNMP)” on
page 57.
Using Intermec SmartSystems Foundation
The IF30 ships with a SmartSystems Client, which means you
can manage it from a central host PC using Intermec’s
SmartSystems Foundation. The SmartSystems Console displays
all SmartSystems-enabled devices in your network.
SmartSystems Foundation is available for free from the Intermec
web site. To download SmartSystems Foundation, go to
www.intermec.com/SmartSystems. For information on using the
SmartSystems Console, in the Console choose SmartSystems >
Help.
Configuring the IF30 with Intermec Settings
• In the console, right-click an IF30 and choose Intermec
Settings from the menu. The Intermec Settings browser
appears.
For help with using Intermec Settings, in the Intermec Settings
browser choose Help > Online Manual.