Chapter 2 — Configuring Network Settings
30 IF30 Fixed Reader User’s Manual
Configuring SNTP Client Settings
This section explains how to configure Simple Network Time
Protocol (SNTP) client parameters. For information on public
NTP servers, see http://ntp.isc.org.
To configure SNTP settings
1 From the menu, click Network Services > SNTP
Configuration. The SNTP Configuration screen appears.
2 Enter SNTP information: In the SNTP Server Name 1 and
SNTP Server Name 2 fields, enter the DNS name or the IP
address of an SNTP or NTP server.
3 Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes,
and then click Save Changes and Reboot. For help, see
“Saving Configuration Changes” on page 15.
Configuring Security
The IF30 supports security features to help maintain the integrity
of your secure network. You can:
• enable/disable access methods. For help see the next section
“Controlling Access to IF30 Menus.”
• change the default user name and password. For help, see
“Setting Up Logins” on page 33.
To Next Page
Loading...
