Chapter 2 — Configuring Network Settings
IF30 Fixed Reader User’s Manual 29
IPv6 Settings Descriptions
Parameter Description
Hostname Name for this device. The default is the
configuration string for this IF30.
The hostname can be either a simple hostname, or
a qualified domain name (FQDN). If this device
obtains its IP address via DHCP, this parameter is
sent to the DHCP server. If the server supports it,
this field is used for dynamic DNS updates.
DNS Address 1 Enter the IP address of a domain name server that
the IF30 uses to resolve DNS names.
DNS Address 2 Enter the IP address of a domain name server that
the IF30 uses to resolve DNS names if the DNS
server at DNS Address 1 is not responding.
DNS Suffix 1 Enter a domain name suffix that will be appended
to DNS names that cannot be resolved.
DNS Suffix 2 Enter a domain name suffix that will be appended
to DNS names that cannot be resolved either by
themselves or using DNS suffix 1.
SYSLOG
Destination
Domain name or IP address of the SYSLOG
server. In Unix networks, system messages are
logged to this server.
To Next Page
Loading...
