Intermec IF30

Index
IF30 Fixed Reader User’s Manual 87
Display Log screen, for DCE,
illustrated, 50
DNS settings, configuring, 28
E
electrical specifications, 80
Enable Antenna Port check box, 48
Enable Logging check box, for DCE, 49
Enabling Autoconfiguration, for IPv6, 27
EPC TCP Port setting, 49
EPCglobal Class 1 Gen 2
certification, 2
tags, choosing in RFID Module
Settings, 44
Ethernet, 26
IF30 in wired network, illustrated, 9
port
described, 5
pin assignments, 83
settings, configuring with web browser
interface, 24
troubleshooting problems, 69
Ethernet port
location, 4
Events Log screen, illustrated, 61
events log, viewing in Maintenance
menu, 61
external controls, using with IF30, 72
F
Field Separator setting, 45
Field Strength setting, 47
fields, in tags, separating, 45
FIELDSEP equivalent, 45
FIELDSTRENGTH equivalent, 48
firmware upgrades, 66
front panel ports
accessing, 4
described, 5
G
general purpose input/output
interfaces, 72
accessing, 72
described, 72
inputs, using, 73
isolated input, 74
open collector input, 74
general purpose input/output interfaces
(continued)
output, switching the high side using
external power, 76
output, switching the low side, 76
power, using, 78
powered input, 73
relay, driving to control AC load, 78
switching the high side using external
power, 77
GPIO. See general purpose input/output
interfaces
H
HyperTerminal, using to configure
IF30, 10
I
ID Report check box, 45
ID Tries setting, 46
IDTRIES equivalent, 46
IF30
configuration summary, viewing, 63
connecting to network, 19
connecting with communications
program, 10
default configuration, restoring, 65
described, 2
DHCP state, describe, 9
dimensions, 80
Ethernet network, described and
illustrated, 9
firmware, upgrading, 66
installing, 18
IP address, setting, 9
learning about, 4
locating with LEDs, 62
maintaining, 60
managing, 54
mounting location, choosing, 18
overview, 2
related documents, list of, ix
RFID settings, configuring, 42
SNMP, managing with, 57
specifications, 80
troubleshooting, 68
unpacking, 3