Appendix A — Specifications
38 PW50 Workboard Printer User Guide
Specialty media is required for unique customer environments,
including printer operating temperature extremes. Intermec
recommends that you test the media in your application.
Supported Media
The PW50 printer supports direct thermal receipt media. Receipt
media is supported in both a top coated and an uncoated paper in
continuous roll stock only.
The default media sensitivity number is 401.
Use the following table as a guide when setting sensitivity numbers
for North American receipt media.
External Fanfold Media Specifications
Specification Value
Stack height 70 mm (2.75 in)
Page length 152 mm (6 in) to 305 mm (12 in)
Note: A 6-inch page length is supplied in 12-inch long stacks (two
6-inch stacks of equal height with the bottom page linked).
Recommended Media Sensitivity, Constant, Factor, and Print Speed
Sensitivity Constant Factor Description Max Print Speed
401 45 40 Duratherm TC 4 ips
102 32 40 Duratherm NTC - 2 4 ips
101 30 40 Duratherm NTC 2 ips
To Next Page
Loading...
