Invacare electra - 5 Manual Operation; 5.1 Disengaging Motors

Invacare
®
Electra Service Manual
Page 20 As at:15.04.02
9.4 Chassis
Detail: antitipper
(1.2 / 1.3)
9.4.1 Components:
Item Qty. Description Item Qty. Description
1.01
1.02
1.15
1.16
1.17
1.2
1.3
1
1
2
4
2
1
1
Chassis unit, complete
Fixing for rear panelling
Bolt, M6 X 30
Washer, M5
Nut, M5
Anti-tipper unit, LH
Anti-tipper unit, RH
1.19
1.20
1.21
1.22
1.23
1.24
1.25
1.26
1
1
1
2
1
1
1
Fixing for anti-tipper wheel
Anti-tipper wheel, 40 mm
Bolt, M6 X 36,5
Washer, M6
Nut M6 self-locking
Bolt, M8 X 40
Nut M8, self-locking
Washer, M8
9.4.2 Components involved:
A Steering fork / front wheel (chapter: 0 page: 21)
B Drive unit (chapter: 9.6 page: 23)
C Battery / electronics (chapter: 10.1 page: 26)
9.4.3 Reassembly information for "replacing anti-tipper wheels
• Only tighten the fixing bolts (1) on the anti-tipper wheel enough to make
sure that the anti-tipper wheels turn freely.
CAUTION:Risk of accidents!
• In vehicles with rear wheel drive, the installation of the anti-tip mechanism is absolutely
imperative.