Invacare electra - 1.2 Type Classification and Area of Use

Invacare
®
Electra Service Manual
Page 8 As at:15.04.02
4.3 After work:
NOTE:
• Always ensure that the Scooter settings are returned to their previous values (seat,
armrest, backrest etc.).
CAUTION:Risk of accidents!
• Check all fixings for tight fit.
• Check all parts for correct interlocking.
• Check all displays and controls for correct working order.
• ALWAYS carry out a trial run after completing any repair or maintenance work.
5 Tool list
You will need a standard tool set with at least the following:
• Open-end and ring spanner size 6, 7, 8, 10, 11, 12, 13, 17, 19 (mm)
• Allen key 2.5, 3, 4, 5, 6, 8, 10 (mm)
• torque wrench (commercial)
• socket spanner set
• slot-headed screwdrivers (various)
• Phillips screwdriver No. 1, 2, 3
• oblique pliers
• flat-nosed pliers
• pointed pliers
• plumber's wrench
• cable lug pliers
• plastic hammer
• wheel bearing puller
• Multimeter with probes and various cable clips
• drive wheel hub puller (available from INVACARE Service)