Single Phase Hybrid Inverter Safety Precautions
2
Chapter 2 Safety Precautions
Improper use may result in risk of electric shock or burns. This Manual provides important instructions for
installation and maintenance of the product. Please read this Manual carefully before using the product, and keep it
for future reference.
2.1 Safety Symbols
The following are the safety symbols used in this Manual to indicate potential safety risks and important safety
instructions.
WARNING!
The warning symbol indicates important safety information that, if not followed properly,
could result in serious personal injury or even death.
RISK OF ELECTRIC SHOCK!
The electric shock hazard symbol indicates important safety information that, if not
followed, could result in electric shock.
Safety Tips!
This symbol indicates important safety information that, if not followed, could result in
serious personal injury or even death.
HIGH TEMPERATURE!
This symbol indicates safety information that, if not strictly followed, could result in burns.
WARNING!
When performing maintenance on the input and output of the inverter after disconnecting it,
wait at least 5 minutes for the inverter to discharge any remaining electrical charge.
2.2 Precautions for Operation
The hybrid inverter in XD3~6KTL series has been designed and tested according to the applicable safety
regulations. This ensures the personal safety of the user. However, as an electrical equipment, the inverter could
cause electric shock or other injuries if not operated properly. Please operate the inverter in accordance with the
following requirements:
1. The wiring, installation and commissioning work should be carried out by professionals.
2. Be sure to read this Manual before operating the product. We shall not be held liable for any failure or loss
caused by improper operation.
3. Before starting the installation or maintenance work, please break the connections at the AC side, DC side
To Next Page
Loading...
Need help?
General