•
To perform maintenance of the inverter, please power off the inverter so as to avoid damage to the
inverter and avoid the risk of electric shock.
•
When the inverter is powered off, it will take time for the internal components to discharge. Please wait
for the time period specified on the label until the inverter is fully discharged.
Step 1: Disconnect the on-grid AC circuit breaker of the inverter.
Step 2: Disconnect the back-up AC circuit breaker of the inverter.
Step 3: Disconnect the EPS circuit breaker between the inverter and battery.
9.3 Removing the Inverter
Step 1: Disconnect all electrical connections of the inverter, including the DC wire, AC wire, communication
cable, communication module and grounding wire.
Step 2: Remove the inverter from the mounting bracket.
Step 3: Remove the mounting bracket.
Step 4: Keep the inverter properly for future use, according to the storage environment requirements.
9.4 Scrapping the Inverter
If the inverter cannot be used any longer, dispose of the inverter according to the electrical waste disposal
requirements of the laws and regulations of your country/region. Do not dispose of the inverter as household waste.
To Next Page
Loading...
Need help?
General