nano3G AP Installation Manual Pre-Provisioning a nano3G AP
N3G_INST_300 v8.1 for N3G_2.0.5 © ip.access Limited 2011 Page 21
Select a Local File
8) Click the radio button for From local file, then click the browse button on the right.
The file browser will appear. Browse to the location of the required file and select it.
For example:
9) Click Open and the file name will be shown in the box for Local file.
Select a File Saved on the OMC-R Server
10) Click the radio button for From server file, then click the browse button on the
right. A list of files saved on the OMC-R server will appear. For example:
11) Click the required file in the list, then click Load. The list will close and the file
name will be shown in the box for Server file.
To Next Page
Loading...
Need help?
General
