Ip.Access nano3G S8 AP User Manual

nano3G AP Installation Manual nano3G AP Hardware Installation
N3G_INST_300 v8.1 for N3G_2.0.5 © ip.access Limited 2011 Page 51
Mount the nano3G S8 AP on a Stand
1) Plug the Ethernet cable and the power cable into the AP or plug the cables from
the POE splitter into the AP.
2) Slide the AP onto the stand.
3) Place the AP on its stand on a stable flat surface.

Ip.Access nano3G S8 AP Specifications

General

Brand	Ip.Access
Model	nano3G S8 AP
Category	Wireless Access Point
Language	English