Iseki TXG237 - Horn; Light Turn Switch; Fuel Gauge

INSTRUMENTS & CONTROLS
27
Horn / Light Turn Switch
FIG. 3-6: Horn / Light Turn Switch.
Horn Switch, 6 - Horn will sound when center switch
button is depressed.
Light Switch, 7 - Is a rotary switch with three operat-
ing positions:
･OFF - Fully counterclockwise. All lights off.
･ 1st - Front clearance lamps and rear tail lights.
･ 2nd - Main beam headlamps and rear tail lights.
NOTE: Passing switch
Passing switch is turned on when switch
knob is pulled to upward over the high beam
position.
NOTE: When high beam is selected (2nd position),
light in indicator light will come on.
Turn Switch, 8 - Operate switch handle in direction
Tractor is being turned. The appropriate flashing am-
ber warning light (ROPS-mounted) will operate as turn
signal. Return switch to center position to cancel.
Fuel Gauge
FIG. 3-8: The gauge indicates fuel level in the fuel
tank when the main switch is in the “ON” position.
NOTE: The gauge can not indicate an accurate
fuel level when the tractor is on an incline.
It takes a little time to indicate an accurate
level after the tractor recovers its horizontal
position.
FIG. 3-6
FIG. 3-7
FIG. 3-8
7
6
8
Turn switch RH
1st
2nd
8
Turn switch LH
high beam
passing