EasyManua.ls Logo

Iseki TXG237 - TROUBLESHOOTING; ENGINE

Iseki TXG237
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TXG237
82
FIG. 5-48
FIG. 5-49
FIG. 5-50
TOWING (Type G)
Ask your ISEKI Dealer for towing Tractor as much as
possible. If such cases as listed below, call your ISEKI
Dealer as transmission might be broken.
Although the engine runs, Tractor cannot start to
move.
Unusual noise occurs.
FIG. 5-48: Hook up the rope to the front hitch (1). The
distance between towing vehicle and Tracor should be
less than 5m.
Move the rage shift lever to the neutral position.
Release the parking brake lock.
JACKING
When jacking Tractor, place the Tractor on level, hard
ground which is sufficiently illuminated, otherwise un-
expected accidents may occur. Follow the instructions
listed below:
Apply parking brakes.
Disengage all PTO.
Place all gear shift levers in neutral.
Remove the starter key.
Place the jack on level.
FIG. 5-49: When raising the rear axle, suitable shims
(1) should be wedged between the front axle and the
front frame.
FIGS. 5-50 & 5-48: When raising the rear axle, the
jacking point is the front hitch (1) or the front frame
(2). For the front axle, the jacking point is the rear
frame (3).
1
2
1
3

Table of Contents

Other manuals for Iseki TXG237

Related product manuals