EasyManua.ls Logo

Iseki TXG237 - GROUND SPEED SELECTION

Iseki TXG237
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATION
39
STOPPING TRACTOR
Reduce engine speed and apply brake pedal.
Position range shift lever in neutral position.
Depress brake pedal firmly and apply parking brake lock.
CAUTION: Never start traveling with the
parking brakes applied, brake perfor-
mance will be effected as they heat up.
Allow engine to idle several minutes to allow even cool-
ing. Then turn main switch to “OFF” shutting off engine.
Lower 3-point hitch and remove key from ignition.
FIG. 4-5: If engine fails to stop when main switch is
turned off, open left side cover and push inward on
end of solenoid boot, 1, until engine stops. Consult
your Dealer when manual operation of engine shut-off
device is necessary.
CAUTION: Before leaving Tractor unat-
tended, make sure brake is locked, rear
mounted implement is lowered to the
ground and key is removed from the ignition.
FIG. 4-6: Always park Tractor on level area whenever
possible. If hillside parking is necessary, securely
block both rear wheels as shown.
NOTE: When stopping or parking Tractor, be sure
brake is locked.
FIG. 4-5
FIG. 4-6

Table of Contents

Other manuals for Iseki TXG237

Related product manuals