Manual No. 085-3435-07 11/45 IGB/IGX Series (Overseas Specifications) Service Manual
2.1.5 Mode List
Mode Contents
*C1 Country No., Scale No., Zero point, Span adjustment
C2 Key check
C3 Display check 1 (simplified check), All LEDs light up
C4
Display check 2 (detailed check), Each segment lights in sequence for each display
digit.
C5 Program No. display
*C6
RAM clear (Program mode data)
E2ROM clear (Program mode data and Test mode C1 data)
(Span adjustment is required)
*C7 Settings for weighing conditions
C8 Reading E2ROM data
C9 Board check (A/D check, Interface check) for factory inspection
To Next Page
Loading...
