ISHIDA INS-100 Service Manual

Chapter 2 INSTALLATION & SETUP

2.6.4 Key Check (C2 Menu)
• Confirm that the “C1” menu is displayed, and
press the [ZERO] key to move to the key
check menu (C2).
• Press the [ADD] key to enter further step.
• Press each key to confirm whether its key
code will be shown on the display.
Note: Refer to the following “Key Code Table”.
Key Code Table
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
• Press the [ON/OFF] key twice to exit this
menu. The machine will be turned OFF.
2.6.5 Display Check 1 (C3 Menu)
• Confirm that the “C1” menu is displayed.
• Press the [ZERO] key twice to enter the
simplified display check menu (C3).
• Press the [ADD] key to enter the simplified
display check menu. All segments will blink.
• Press the [CLEAR] key to return to the “C3”
menu.
INS-100 Service Manual No. 085-6692-09 21

ISHIDA INS-100 Specifications

General

Brand	ISHIDA
Model	INS-100
Category	Scales
Language	English