Chapter 2 NORMAL MODE
2.5 MARKDOWN PRICE
This section explains about how to apply a markdown price for the selected PLU tentatively.
EXAMPLE
Change the MD price to PLU131 tentatively.
1. Make sure that the desired PLU
screen is displayed.
Lightly press the touch
panel with your finger.
Pressing the panel
using pointed objects
such as fingernails or
mechanical pencils
may damage the touch
panel.
2. Press the [M.D. PRICE] field on
the screen.
3. The Markdown Price Mode
Setting screen is displayed.
page 2-10 IP-EMZ Operation Manual
To Next Page
Loading...
