IT7300 Programming Guide
Copyright © Itech Electronic Co., Ltd. iii
⚫ Do not install alternative parts on the instrument or perform any
unauthorized modification.
⚫ Do not use the instrument if the detachable cover is removed or
loosen.
⚫ To prevent the possibility of accidental injuries, be sure to use the
power adapter supplied by the manufacturer only.
⚫ We do not accept responsibility for any direct or indirect financial
damage or loss of profit that might occur when using the instrument.
⚫ This instrument is used for industrial purposes, do not apply this
product to IT power supply system.
⚫ Never use the instrument with a life-support system or any other
equipment subject to safety requirements.
⚫ Failure to use the instrument as directed by the manufacturer may
render its protective features void.
⚫ Always clean the casing with a dry cloth. Do not clean the internals.
⚫ Make sure the vent hole is always unblocked.
Environmental Conditions
The IT7300 series power supply can only be used indoors or in low
condensation areas. The following table shows general environmental
requirements for this instrument.
To Next Page
Loading...
