ITech IT7300 Series - Chapter12 Trigger Commands; Trigger[:Immediate]; Trigger:source

Trigger Commands
Copyright © Itech Electronic Co., Ltd. 50
Chapter12 Trigger Commands
TRIGger[:IMMediate]
This command can generate a trigger regardless of the current trigger mode
selection.
Command syntax
TRIGger[:IMMediate]
Parameters
None
Related commands
*TRG TRIG:SOUR
TRIGger:SOURce
This command is used to select the source of the trigger signal. The power
supply can receive the trigger signal from the panel (keyboard trigger Trigger
key), receive BUS trigger signal or external signal trigger. Trigger source is set
to MANUAL trigger when * RST command is executed.
Command syntax
TRIG:SOUR <mode>
Parameters
MANUal|BUS|EXTern
Query syntax
TRIGger:SOURce?