ITech IT7300 Series Programming Guide

Maximum Power Point Scanning Commands
Copyright © Itech Electronic Co., Ltd. 48
Parameters
SECond|MINUte|HOUR
Example
SWE:STEP:TIM:UNIT SEC
Query syntax
SWEep:STEP:TIMe:UNIT?
SWEep:STEP:TIMe
This command is used to set the single-step time of the scan function.
Command syntax
SWEep:STEP:TIMe
Parameters
MINimum|MAXimum|Float
Example
SWE:STEP:TIM 3
Query syntax
SWEep:STEP:TIMe?
SWEep:STARt:FREQuecy
This command is used to set the start frequency of the scan function.
Command syntax
SWEep:STARt:FREQuecy
Parameters
MINimum|MAXimum|Float
Example
SWE:STAR:FREQ 50
Query syntax
SWEep:STARt:FREQuecy?
SWEep:STEP:FREQuecy
This command is used to set the step frequency of the scan function.

ITech IT7300 Series Specifications

General

Brand	ITech
Model	IT7300 Series
Category	Power Supply
Language	English