Document Itron part number
Field Deployment Manager Tools Application Guide TDC-1713-XXX
Field Deployment Manager Field Representative's Guide TDC-1714-XXX
Intelis Gas Meter models
The Intelis Gas Meter is available in the listed types.
• Temperature compensated
• Non-temperature compensated
Intelis Gas Meter components
The Intelis Gas Meter features these components in a compact solid state meter.
• Intelis Gas Meter index
◦ The index contains the integrated 500G communications module, battery pack, and
the liquid crystal display (LCD). The LCD provides a visual display of consumption,
alarm messages, and status information. For information about LCD operation, see
The Intelis Gas Meter LCD on page 15.
• An internal shutoff valve
• Ultrasonic measuring unit (UMU)
• Inlet and outlet tube
• Dust trap and filter
• Die cast aluminum case
• Steel hubs
Internal safety shutoff valve
Caution:
It is mandatory that a technician be on site at the meter to re-open the
valve and ensure safe conditions before the flow of gas is resumed after a valve has
been closed.
The Intelis Gas Meter shutoff valve is located in the outlet of the meter. The automatic
shutof
f valve is a safety feature automatically triggered if the meter is configured for
automatic shut off for high flow or high temperature events. The valve can also be shut off
through an RF command over the Mobile or OpenWay Riva Network.
Automatic shutoff configuration
The Intelis Gas Meter can be configured for an automatic shut off for the following event
types.
• High flow. Configuration for a high flow event enables an automatic shut off if the high
flow threshold is reached or exceeded in a configurable window of time.
Intelis Gas Meter
Intelis Gas Meter Installation Guide TDC-1782-002 7
Proprietary and Confidential
To Next Page
Loading...
Need help?
General
