Setting up the prover
1. If you have not previously done so, log on to the prover.
Note: If you are proving an Intelis Gas Meter for the first time on the prover or if you are
changing proving parameters for the Intelis Gas Meter, you must log on as a Supervisor.
To set up Itron Intelis Gas Meter and ITRON-RTY for the first time, follow steps 2 through
10.
2. Select Special Functions.
3. Select Edit Config T
ables.
4. Select Edit Setup V
alues.
Proving the Intelis Gas Meter
Intelis Gas Meter Installation Guide TDC-1782-002 25
Proprietary and Confidential
To Next Page
Loading...
Need help?
General
