• Other revs: 1
• Exercise revs: 1
• Revs unit volume: 4
• Jog rate: 50
• Max press diff: 0.5
• Miscellaneous customer-specific parameters as required (covered in Step 9)
9. Verify or enter the T
OLERANCE values for POS, NEG, Slope, Repair, and Meter Size.
These settings (values) are customer-specific.
10. Click off the table and select Update T
able.
11. Select Exit, select Exit.
Proving the Intelis Gas Meter
Intelis Gas Meter Installation Guide TDC-1782-002 28
Proprietary and Confidential
To Next Page
Loading...
