Editing Milling Jobs
90
Operating the material and tool changer via the main menu [ToDo]
You are in the main menu [ToDo].
The material and tool changer is not active.
In the [Tools] section, in the list of
required tools, tap the tool of your
choice.
The material and tool changer will be brought into position and the tool holder will be
provided at the loading aid.
You can now insert the tool (“Inserting the tools into the device using the loading aid”,
page 92).
The app shows a Wizard which will guide you step by step through the insertion process.
Tetric® CAD HT A3 C14
IPS e.max® CAD HT A1 I12
IPS Empress® CAD LT B1 C14
To Next Page
Loading...