Editing Milling Jobs
96
You can now remove the tool (“Removing tools from the device via the loading aid”,
page 97).
The app shows a Wizard which will guide you step by step through the removal process.
Operating the material and tool changer via the main menu [Service]
You are in the main menu [Service].
The material and tool changer is not active.
1. Select the sub-menu [Tools].
2. In the list of tools, tap the position of
your choice.
The material and tool changer will be brought into position and the tool holder with the
tool in place will be provided at the loading aid.
You can now remove the tool (“Removing tools from the device via the loading aid”,
page 97).
The app shows a Wizard which will guide you step by step through the removal process.
To Next Page
Loading...