Editing Milling Jobs
97
Removing tools from the device via the loading aid
CAUTION! Sharp edges on the tool holder.
Risk of cutting injury
Only grasp the tool holder on the closed sides (front and back sides).
CAUTION! Sharp edged tools!
Cutting injuries by sharp cutting edges!
When handling the tools, be careful not to injure yourself or others.
Only grasp the milling tools on the shaft, not on the cutting edge.
For safety reasons, the Wizard asks you to additionally confirm the following steps in the app.
1. Remove the tool holder with the tool
from the loading aid in the direction of
the arrow.
To Next Page
Loading...