Jacobsen AR-3 - Fuses

ELECTRICAL
4181384 First Edition 4-77
4
Fuses
Plug-In Fuses
Removal and Installation
See Figures 4-59 and 4-60.
1. Park the mower safely. (See “Park Mower Safely” on
page 1-7.)
2. Disconnect the battery negative (–) cables at the
battery.
3. Remove instrument panel. (See “Instrument Panel”
on page 4-76.)
Figure 4-59
4. Remove the fuse holder cover(s) (1 or 2).
Figure 4-60
5. Remove fuse(s) (3) by pulling the fuse(s) straight out
of the fuse holder.
Installation Note
Install plug-in fuse(s) by reversing the order of removal.
Strip Fuses
Removal and Installation
See Figures 4-61 and 4-62.
1. Park the mower safely. (See “Park Mower Safely” on
page 1-7.)
2. Disconnect the battery negative (–) cables at the
battery.
3. Raise hood.
Figure 4-61
4. Open the fuse holder cover (1).
Figure 4-62
5. Remove two lock nuts (2), and remove strip fuse (2).
Installation Note
Install strip fuse by reversing the order of removal.
1
TN1127
2
TN1128
3
1
TN1109
TN1110
2
2