Page 23
AquaLink
®
Touch™ Owner's Manual
5.3 All Off
The ALL OFF mode will turn off equipment that
has been turned on by any means (manual or pre-
programmed). This includes any of the heaters that were
on (unless in use by Maintain function).
HOME > ONETOUCH > ALL OFF
From the HOME menu, touch ONETOUCH button to
display the ONETOUCH screen. Touch the ALL OFF
button.
m
Menu OneTouch Help Back Status
Photos
Power
Thu January 1, 2009 3:03 PM
OneTouch
Spa Mode
Clean Mode
All Off
Off
On
Off
Off
Off
Off
OneTouch 4
OneTouch 5
OneTouch 6
Section 6. Using the Help Menu
6.1 Help Menu
The HELP menu displays service information about
your local service provider as entered in the PRODUCT
INFORMATION system setup section.
See Section 10.17, "Product Information".
The HELP menu screen also provides diagnostic system
information such as connection of devices, operation
state of sensors, and errors of the system, if any.
MENU > HELP
From the MENU screen, touch the HELP button to
display the HELP screen. Touch the PAGE UP or PAGE
DOWN button to scroll. The NEXT button will display
the HELP SENSORS screen.
Next
For Service
Call
Local Service Co
555-555-5555
ome Menu OneTouch Help Back Status
Photos
Power
Thu January 1, 2009 3:03 PM
Help
Page
Down
Page
Up
Model: RS-4 Only
AquaLink: Rev Q.30
CPU p/n: E0280801
TL Rev: TLSim01
JBox Rev: W.in
Interface: AquaLink Touch
Touch the BACK button to return to the previous
screen.
6.2 Help Sensors
This screen displays the operation state of the sensors.
MENU > HELP > HELP SENSORS
From the HELP menu, touch the NEXT button to
display the HELP SENSORS screen.
Next
For Service
Call
Local Service Co
555-555-5555
om
Menu OneTouch Help Back Status
Photos
Power
Thu January 1, 2009 3:03 PM
Help Sensors
Page
Down
Page
Up
Air: OK
Solar: OK
Water: OK
Sensors
To Next Page
Loading...
Need help?
General
