Page 5
AquaLink
®
Touch™ Owner's Manual
14.3 To Confi gure the pH Controller .......................58
14.3.1 pH Feeder Type.........................................58
14.3.2 pH Feeder Times .......................................58
14.3.3 pH Delay On Time .....................................59
14.3.4 pH Setpoint ...............................................59
14.3.5 pH Alarm - High Alert .................................59
14.3.6 pH Alarm - Low Alert .................................59
14.3.7 pH Acid or Base Feed ...............................60
14.3.8 pH Next Cleaning ......................................60
14.3.9 pH Next Calibration ...................................60
14.3.10 pH Calibration ...........................................60
14.4 Manual Feed Activation ...................................61
14.4.1 To Perform an ORP Manual Feed .............61
14.4.2 To Perform a pH Manual Feed ..................61
14.4.3 To Enable the ChemLink™ Feeder Tank
Level Switch ..............................................61
Section 15. Glossaries ................................... 62
15.1 Safety Delays and Lockouts ...........................62
15.2 Special Auxiliary Labels ..................................62
15.3 Controller Messages .......................................63
Section 16. AquaLink Touch Menu Flow
Chart ............................................ 64
DATE OF INSTALLATION
INSTALLER INFORMATION
INITIAL PRESSURE GAUGE READING (WITH CLEAN FILTER)
PUMP MODEL
HORSEPOWER
FILTER MODEL
SERIAL NUMBER
CONTROL PANEL MODEL SERIAL NUMBER
NOTES:
EQUIPMENT INFORMATION RECORD
To Next Page
Loading...
