40
Weight : 850g
Calorific value : 2.2MJ (610Wh)
Installed location : any
Connectable conductors
Solid , stranded, flexible : 0.08 - 2.5mm2
Plug connector, wire end ferrule : 1.5mm2 only one conductor may be
connected for each terminal connection!
Ambient conditions
Operating temperature range : -10°C .. +55°C
Storage temperature range : -20°C .. +70°C
Relative air humidity : 15% .. 95% without condensation
Operating altitude : 0 .. 2000m above sea level
Degree of protection
Front : IP50 to IEC529
Front with seal (option) : IP65 to IEC529
Rear : IP20 to IEC529
Pluggable screw terminal : IP20 to IEC529
Auxiliary power (see rating plate) : 300V CATIII
Test voltage : 3150V DC
Range 1 (standard) : 85 .. 265V AC, 120 .. 370V DC
Range 2 (option) : 40 .. 115V AC, 55 .. 165V DC
Range 3 (option) : 15 .. 50V AC, 20 .. 70V DC
Back-up fuse : 4A .. 10A (medium time lag)
Power consumption : max. 5W, max. 9VA
Measurement
Current measurement
Overvoltage category : 300V CATII, 150V CATIII
Test voltage : 2000V DC
Power consumption : approx. 0.2 VA
Nominal current for ../5A (../1A) : 5A (1A)
Limit current : 9.5A (sinusoidal)
Overload, continuous : 6A (sinusoidal)
Overload : 60A for 1 sec.
Voltage measurement
Overvoltage category : 500V CATIII
Test voltage : 4200V DC
Impedance : 4MOhm/Phase
Power consumption : approx. 0.1 VA
Measuring range L-N : 50 .. 500V AC
Measuring range L-L : 90 .. 870V AC
Frequency of the fundamental component : 45Hz.. 65Hz
Technical Specifications
To Next Page
Loading...
