46
The UMG507 fullfils the safety requirements of the:
Directive 89/336/EEC in conjunction with DIN EN61326 (2002-03) and the
Directives 73/23/EEC and 93/68/EEC in conjunction with EN 61010-1 (2002-08)
Safety regulations
Safety regulations for electrical measurement, control and laboratory equipment
: EN61010-1 08:2002, IEC 61010-1:2001
Class of protection : I (device with protective conductor)
EMC requirements
Emitted interference,
residential area : DIN EN61326:2002-03, Table 4 Class B
Noise immunity, industrial area : DIN EN61326:2002-03, Table A.1
Housing : Electrostat. discharge, IEC61000-4-2(4kV/8kV)
: Electromagn. fields, IEC61000-4-3:2002 (10V/m)
: Electromagn. fields, IEC61000-4-8:2000 (100A/m)
Operating voltage : Voltage dip, IEC61000-4-11 (0.5 period.)
: Bursts, IEC61000-4-4 (2kV)
: Impulse voltages, IEC61000-4-5 (1kV L to N)
: Conducted HF signals, IEC61000-4-6 (3V)
Measured inputs : Impulse voltages, IEC61000-4-5 (2kV)
: Conducted HF signals, IEC61000-4-6 (3V)
: Bursts, IEC61000-4-4 (2kV)
RS485, dig. inputs and outputs : Conducted HF signals, IEC61000-4-6 (3V)
: Bursts, IEC61000-4-4 (1kV)
Appendix
Declaration of conformity
To Next Page
Loading...
