Janome MC9500 - Replacing Printed Circuit Board A; To remove:

23
MC 9500
Replacing Printed Circuit Board A
Screws (6 pieces)
TTP connector
LCD connector
Printed circuit board F connector
Card guide
Inverter connector
Slide volume connector
5
1
2
3
4
6
7
To remove:
1 Remove the front cover. (See page 6)
2 Pull out the printed circuit board F , TTP ,
LCD , Inverter and Slide volume connectors.
3. Remove Screws (6 pieces) and remove the printed
circuit board A with the Card guide .
To remove:
4 Follow the above procedure in reverse.
51
2
3
4
671
11
4 2
3
6
7
1
5
www.promelectroavtomat.ru