Janome MC9500 - Changing External Parts (2) Belt Cover; Replacing the belt cover

2
MC 9500
Changing External Parts (2) Belt Cover
Replacing the belt cover
To remove:
1 Raise the carrying handle and remove Screw (A) .
2 Remove the Cap and remove Screw (B) .
3 Lay the machine down on its back and remove Screws
C and D , then remove the Belt cover .
Screw (A)
Cap
Screw (B)
Screw (C)
Screw (D)
Belt cover
To attach:
4 Match the Belt cover position with the front cover.
5 Attach the Belt Cover with Screws (A - D) - .
5. Attach the Cap .
1
2
6
4
5
2 5
1
1
2
3
6
4
5
6
3
1
2
3
4
5
6
www.promelectroavtomat.ru