Janome MC9500 - Changing External Parts (1) Face Cover;Top Cover; Replacing the face cover; Replacing the top cover

1
MC 9500
Replacing the top cover
To remove:
1 Open the Top cover and remove Screw (B) .
2 Raise the carrying handle and remove Screw (C) .
3 Pull out the Top cover to the rear side.
To attach:
4 Raise the carrying handle, insert the Top cover from
rear side to toward you and tighten Screws (B) ,
(C) to attach the Top cover .
Changing External Parts (1) Face Cover/Top Cover
To remove:
1. Remove the Cap and Screw (A) and remove
the Face Cover .
Cap
Screw (A)
Face cover
To attach:
2. Attach the Face Cover and tighten Screw (A) ,
then attach the Cap .
Replacing the face cover
3
2
1
1
2
3
1
2
3
3 2
1
1
2
3
1
2
3
1
2
3
1
Top cover
Screw (B)
Screw (C)
1
2
3
1
www.promelectroavtomat.ru