Janome MC9500 - Replacing Switching Power Supply; To remove:; To attach:

38
MC 9500
Replacing Switching Power Supply
To remove:
1 Remove face cover, belt cover, front cover and rear
cover.
2 Remove Screws (A) , (B) and remove the
machine socket and fixing plate.
3 Pull out the Machine socket unit connector .
4 Remove Screw (C) and remove the Idler .
5 Remove Screws (D) (2 pieces) and Switching
power supply to the handwheel side.
To attach:
6 Follow the above procedure in reverse.
Screw (A)
Screw (B)
Machine socket unit connector (primary circuit)
Screw (C)
Idler
Screw (D)
Switching power supply
1
2
3
4
6
7
1
2
3
4
5
6
7
5
1
2
3
4
5
6
7
www.promelectroavtomat.ru