EVOLVE 200 USER MANUAL
3
RISK OF FIRE AND BURNS
Sparks (sprays) may cause fires and burn the skin; you should therefore make sure there are
no inflammable materials in the area, and wear appropriate protective garments.
NOISE
This machine does not directly produce noise exceeding 80dB. The plasma cutting/welding
procedure may produce noise levels beyond said limit; users must therefore implement all
precautions required by law.
PACEMAKERS
The magnetic fields created by high currents may affect the operation of pacemakers. Wearers
of vital electronic equipment (pacemakers) should consult their physician before beginning any
arc welding, cutting, gouging or spot welding operations.
EXPLOSIONS
Do not weld in the vicinity of containers under pressure, or in the presence of explosive dust,
gases or fumes. All cylinders and pressure regulators used in welding operation should be
handled with care.
To Next Page
Loading...
