Jasic EVOLVE 200 - Appendix 1 Spare Functions; Fan Control; Optional Functions via JTE Cloud; JTE Cloud Platform Usage

EVOLVE 200 USER MANUAL
44
Appendix 1 SPARE FUNCTIONS instructions
1) FAN CONTROL :
The ON /OFF of the fan is controlled automatically.
The fan works if the internal inverter temperature is >30°C during the welding.
The fan works in standby mode of the machine if the internal inverter temperature is >40°C
2) OPTIONAL FUNCTIONS:
ON DEMAND FUNCTIONS, ENABLES, DISPLAYS are available from the JTE Cloud
See the instructions on the JTE cloud.
3) JTE CLOUD:
a. Official website of JTE cloud platform：https://cloud.jteurope.com/user/login.
b. In JTE cloud, you can register and pay attention to your machine information.
For example:machine information,alarm information,software update, Welding procedure test report, etc.
Machine information and alarm information
Machine information and alarm information are displayed on the home page.
Machine information Contains:Serial Number,Model,Location,Firmware Version,Registration Date, etc.
Alarm information Contains:Alarm ID,Date,Alarm code,description, etc.