Jasic EVOLVE 200 - Serial Number Plate Reference; Typical Gas Usage for MIG;MAG

EVOLVE 200 USER MANUAL
5
Typical gas usage for MIG/MAG equipment:
Material type
Wire diameter
[mm]
DC electrode positive Speed wire
(m/min)
Shielding gas Gas flow
(lt/min)
A V
Carbon, low
alloy steel
0,9 ÷ 1,1 95 ÷ 200 18 ÷ 22 3,5 – 6,5 Ar 75%, CO
2
25% 14 ÷ 19
Aluminium 0,8 ÷ 1,6 90 ÷ 240 18 ÷ 26 5,5 – 9,5 Argon 14 ÷ 19
Austenitic
stainless steel
0,8 ÷ 1,6 85 ÷ 300 21 ÷ 28 3 - 7
Ar 98%, O
2
2% /
He 90%, Ar 7,5%
CO
2
2,5%
14 ÷ 16
Copper alloy 0,9 ÷ 1,6 175 ÷ 385 23 ÷ 26 6 - 11 Argon 12 ÷ 16
Magnesium 1,6 ÷ 2,4 70 ÷ 335 16 ÷ 26 4 - 15 Argon 24 ÷ 28
TIG Process:
In TIG welding process, gas usage depends on cross-sectional area of the nozzle. For commonly used
torches:
Helium: 14-24 l/min
Argon: 7-16 l/min
Notice: Excessive flow rates will cause turbulence in the gas stream which may aspirate atmospheric
contamination into the welding pool.
Notice: A cross wind or draft moving can disrupt the shielding gas coverage, in the interest of saving of
protective gas, use screen to block air flow.
End of life
At end of life of product, it has to be disposed for recycling in accordance with Directive 2012/19/EU (WEEE).
Information about the dismantling of product and Critical Raw Material (CRM) present in the product can be
found in the website.
3 Serial Number of the product
AA = year of production
BB = week of production
CCC = progressive number
4 Symbol of welding current source type
5 Conformity references
6 Output data
7 Power supply data
7 Protection data / symbols / other