116 GETTING TO KNOW YOUR INSTRUMENT PANEL
The systems allow the driver to select information by
pushing the following buttons mounted on the steering
wheel:
Instrument Cluster Display Control Buttons
• Up Arrow Button
Push and release the up arrow button to scroll
upward through the main menu and submenus.
• Down Arrow Button
Push and release the down arrow button to scroll
downward through the main menu and submenus.
• Right Arrow Button
Push and release the right arrow button to access
the information screens or submenu screens of a
main menu item.
• Left Arrow Button
Push and release the left arrow button to access
the information screens or submenu screens of a
main menu item.
• OK Button
Push the OK button to access/select the information
screens or submenu screens of a main menu item. Push
and hold the OK button for one second to reset displayed/
selected features that can be reset.
Oil Change Reset
• Your vehicle is equipped with an engine oil change indi-
cator system. The “Oil Change Due” message will display
in the instrument cluster display for five seconds after a
single chime has sounded, to indicate the next scheduled
oil change interval. The engine oil change indicator system
is duty cycle based, which means the engine oil change
interval may fluctuate, dependent upon your personal
driving style.
• Unless reset, this message will continue to display each
time the ignition is cycled to the ON/RUN position.
2020_JEEP_MP_OM_USA=GUID-E8C7E66B-DF9E-40BA-9B4A-03D9C7E22684=1=en=.backup.book Page 116
To Next Page
Loading...
