96 GETTING TO KNOW YOUR VEHICLE
HOOD
Opening The Hood
Two latches must be released to open the hood.
1. Pull the hood release lever located underneath the
driver’s side of the instrument panel.
Hood Release Location (Underneath Instrument Panel)
2. Move to the outside of the vehicle. The safety latch release
lever is located behind the front edge of the hood at the
center. Reach in at the center of the hood with a palm
facing the ground. Once contact is made with the safety
latch release lever, push it toward the passenger side of
the vehicle to fully release the hood.
Hood Safety Latch Release Lever Location
2020_JEEP_MP_OM_USA=GUID-E8C7E66B-DF9E-40BA-9B4A-03D9C7E22684=1=en=.backup.book Page 96
To Next Page
Loading...
