MULTIMEDIA 517
• You can interrupt the help message or system prompts by
pushing the VR or Phone button and saying a Voice
Command from the current category.
Uconnect Voice Command Buttons
Basic Voice Commands
The basic Voice Commands below can be given at any point
while using your Uconnect system.
Push the VR button . After the beep, say:
• “Cancel” to stop a current voice session
• “Help” to hear a list of suggested Voice Commands
• “Repeat” to listen to the system prompts again
Notice the visual cues that inform you of your voice recogni-
tion system’s status. Cues appear on the touchscreen.
1 — Push To Initiate Or To Answer A Phone Call, Send, Or Receive A
Text
2 — For All Radios: Push To Begin Radio, Media, Or Climate
Functions. For Uconnect 4C NAV System Only: Push To Begin
Navigation Function
3 — Push To End Call
9
2020_JEEP_MP_OM_USA=GUID-E8C7E66B-DF9E-40BA-9B4A-03D9C7E22684=1=en=.backup.book Page 517
To Next Page
Loading...
