STARTING AND OPERATING 297
ParkSense Display
When the vehicle is in REVERSE, the instrument cluster
display will show the park assist system status.
The system will indicate a detected obstacle by showing a
single arc in one or more regions based on the obstacle’s
distance and location relative to the vehicle.
If an obstacle is detected in the center rear region, the display
will show a single solid arc in the center rear region. As the
vehicle moves closer to the obstacle, the display will show
the single arc moving closer to the vehicle and the audible
chime increases as the objects gets close to the vehicle.
If an obstacle is detected in the left and /or right rear region,
the display will show a single flashing arc in the left and/or
right rear region. As the vehicle moves closer to the obstacle,
the display will show the single arc moving closer to the
vehicle and the audible chime increases as the objects gets
close to the vehicle.
Single 1/2 Second Tone/Solid Arc
5
2020_JEEP_MP_OM_USA=GUID-E8C7E66B-DF9E-40BA-9B4A-03D9C7E22684=1=en=.backup.book Page 297
To Next Page
Loading...
